Before the high coating I reinforced the hull with 194 g/m2 2/2 fiberglass cloth. It was not necessary according to the plan – I just wanted to achieve more strength and thickness. Be sure that enough resin covers the fiber glass. I used the next method: first I covered the hull with low density epoxy resin before spreading the glass cloth. Just right after this, I covered the glass cloth onto the resin-wet surface without a pucker. After covering the glass, I lubricated the top of the glass coat with resin using a painting roll and plastic spatula. Very important to avoid the air bubbles under the glass. It needs pretty much force, but be careful not to make the coat ropy.

P1210208 P1210210 P1210221

 P1210222 P1210289 P1210226