Sheer clamp capping

After planning the hull skin plywood sheet to reach the shorter base of the trapeze cross sectioned sheer clamp the capping has to be jointed between the deck and the hull skin must be prepared. It is made by 12 mm plywood.


P1200606_a P1200607_a P1200609_a

P1200626 P1200627

Sheer clamp

Sheer clamps are glued and screwed on both side. It was very hard job to do. The sheer clamps had to be tensed in two different directions during fitting to the bulkheads and the cleats. It needs three men’s work. I had also made a simple frame for fitting the hull of the sugar scoop area at the stern.

P1190805 P1190808 P1190810