Fiberglass reinforcements
Before the high coating I reinforced the hull with 194 g/m2 2/2 fiberglass cloth. It was not necessary according to the plan – I just wanted to achieve more strength and thickness. Be sure that enough resin covers the fiber glass. I used the next method: first I covered the hull with low density epoxy resin before spreading the glass cloth. Just right after this, I covered the glass cloth onto the resin-wet surface without a pucker. After covering the glass, I lubricated the top of the glass coat with resin using a painting roll and plastic spatula. Very important to avoid the air bubbles under the glass. It needs pretty much force, but be careful not to make the coat ropy.